A guide to weighing the World bicycle-bicycle rim

Job bicycle maintenance The correct way is a very important thing that helps you ensure that your bike is always safe in traffic or daily trips. When it comes to bicycle maintenance, many people think that just maintaining the gears, tires or convex chains is not enough. In order for your car to always maintain its balance, one wheel can easily swing, causing unfortunate accidents. With the following steps, you can fully maintain your bike’s safety by yourself and deliver high cycling performance by yourself.

1. Check the spokes

-Step 1: Check for loose spokes

Instructions on how to weigh bicycle rims -1
Use your bare hands to check the tension of the spokes

Using your hands not to touch the spokes if you find that soft spokes (overlap) have no tension, you need to adjust the stiffness of the spokes now.

-Step 2: Check the tightness of the spokes of the spokes using the rim

Instructions on how to weigh bicycle rims -2
Use the rim to check for loose knobs

Using these knobs, you can tighten or loosen the spokes and adjust as much as you want until your wheels are weighed, the spokes have good tension and give steady movement. and balance for the rim.

Perhaps you may also want right now to have your wheel unbalanced and have loose spokes for this very purpose of practice right now.

-Step 3: Let your bike rest on the handlebars and saddle

Instructions on how to weigh bicycle rims -3
Place your bike on the saddle and handlebars

Usually some bike repair places use standing bicycles, but if you turn your bike upside down, it can be easier to check and observe the wheel shifting and detect exact deviations. more.

2 Check the rim’s rotation

-Step 1: Perform tire removal for the best possible check

Instructions on how to weigh bicycle rims -4
Remove the tire tube to check the rim more accurately

Usually it is possible to feel the wobble of the rim and wheel while riding. The wheel does not go in a fixed direction and is subjected to constant swinging, causing discomfort and impairing pedal performance. In order to be able to accurately detect and verify the degree of reversal, remove the tires and tubes to get the best results. With just one rim, it is easier to detect in the process of checking and marking errors.

-Step 2: Use an object with straight edges to check the rim

Instructions on how to weigh bicycle rims -5
Use a ruler or flat edge object so that you can check the rim’s reversal

Use straight-sided objects such as a ruler, a pencil or other brace objects to press against the rim. This will make it easier to see the slightest fluctuations of the rim against this straight edge.

Or you can also put the rim on the balance tool, if during the rotation the rim does not rotate in a straight line but wobbles, it is easy to detect with the naked eye.

-Step 3: Rotate the wheel to detect the collision of the rim

Instructions on how to weigh bicycle rims -6
Detects rim collisions against the ruler edge

When the rim turns, the places where the rim hits the straight edge are misalignment and it is necessary to correct it.

-Step 4. Tighten the knobs to loosen the rim of the rim

Instructions on how to weigh bicycle rims -7
Use the knob to tighten the spokes where the point collides with the straight edge

Make tightening of the spokes where the rim edges touch firmly. Always be sure to tighten the knobs so that your wheels are strong, tight, and no warping occurs.

-Step 5 Perform rotation of your wheel after each calibration

Perform correction several times until the distances are equal, the rim no longer touching the flat edge of the ruler at all positions is relatively balanced.

3. Make the wheel and brake movement

Step 1: Perform the installation and release of the wheel and see if the wheel is perfect as it turns

Instructions on how to weigh bicycle rims -8
Rotate the calibration wheel after each spokes alignment

If at perfect level, every point on the rim will appear equal and not close, all braking performance on all points on the rim will be equal.

-Step 2: Use the brake to see the change of the rim

Instructions on how to weigh bicycle rims -9
Use the brake to see rim changes

Apply the brake gradually and it is possible to observe the brake pressing point first.

-Step 3: Activate the brake on the points of the rim

Perform the brake on the opposite side where the brake touches to pull the rim back. Like the smooth circle, brake slowly and tighten.

-Step 4:Rim correction

Instructions on how to weigh bicycle rims -10
Use the knob to tighten and adjust the spokes

Make adjustments and tighten the spokes by turning it until no point hits the front brake any other.

4.Check the wheel movement one last time

Instructions on how to weigh bicycle rims -11
Perform many times to detect mistakes and continue to correct until satisfied

Check the spokes you found wrong at the beginning of the process, most of the time these adjustments can completely fix the laxities you encountered at the beginning. If not, practice repeating the same process over and over until you are satisfied with the movement of the tire.

If you are a newbie and still quite surprised with the mechanical repair jobs, immediately consult experienced car players to be able to improve. knowledge of playing sports bikes the best way through which you maintain and keep your car in its best performance.

>> See more: A guide to basic bike maintenance before and after the trip for newbies

Source content: A guide to weighing the World bicycle-bicycle rim

>> Bike How

Rate this post

Be the first to comment

Leave a Reply

Your email address will not be published.