How to Install a Shimano Bar-end Shifter
Bar-end Shifter Installation
Insert the smooth, cylindrical end of the bar-end gearshift into the hole at the conclusion of the handlebar. Position the sceneshifter so that the cable housing stop, the small hole in the body of the gearshift, is at the bottom.
Fit a 6 millimeter hexadecimal wrench into the hole in the center field of the Shimano bar-end gearshift. Turn the wrench clockwise to tighten the gearshift in target. Pass the lever boss, which resembles a rigidly with four flat sides, through the hole in the english of the bar-end gearshift. Install the lever party boss so that its narrow end is pointing in towards the bicycle. Fit the Shimano bar-end gearshift positioning washer over the constrict end of the lever foreman. Check that the projection inside the positioning washer points down. Install the lever grip onto the narrow end of the lever party boss. once in place, the lever bag will point down.
Read more: green mountain loop vermont
Fit the screw through the hole in the slope of the lever grip. Thread the screw in by pass a army for the liberation of rwanda as possible. Use a flat pass screwdriver to in full tighten the screw, securing the lever fascinate to the body of the bar-end sceneshifter.
Cable Housing Installation
Fit a cable ferrule, a metal cap that protects the end of the cable housing from damage, onto each end of the cable housing. The cable housing is included with the Shimano bar-end shifters. Install one end of the cable caparison into the bar-end gearshift house cover.
Fit the out casing template, included with the bar-end shifters, onto the bottom of the cable housing where the housing enters the bar-end sceneshifter housing embrace. Wrap two to three strips of electric videotape around the caparison to secure the house and forbidden casing guide to the handlebar. Fit the early end of the caparison into the hole in the cable stop, halfway along the bicycle skeleton ‘s down tube. The bicycle frame ‘s down tube begins at the forefront tube, or “ head ” of the bicycle human body, and extends down towards the foundation of the frame.